X Series E83 X3 3.0d (M57TU) OFFRD
16 11 060
Removing and installing or replacing fuel
filler pipe
Recycling
Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Before starting the engine for the first time:
•
Fill fuel tank with at least 5 litres of fuel.
•
Check ground connection at fuel filler neck to body for
continuity. If necessary, clean contact surface between
body and fuel filler pipe screw connection.
Necessary preliminary tasks:
•
Remove rear right wheel arch trim
•
Draw off fuel from fuel tank
Unhook retaining strap (1) from tank flap.
Open cap and set to one side.
RA Removing and installing or replacing fuel filler pipe
BMW AG - TIS
14.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -