X Series E83 X3 3.0d (M57TU) OFFRD
18 31 070
Replacing centre muffler (M57TU, M57T2)
Special tools required:
•
00 2 210
Warning!
Scalding hazard!
Only perform these tasks after exhaust system has cooled
down.
Determine pipe length on new centre muffler.
Carry over dimensions to faulty centre muffler and mark cutting
line.
Cut exhaust pipe with special tool 00 2 210 at marked point.
Deburr cutting line.
Installation:
Connect center muffler to rear muffler by means of clamping
sleeve.
Align clamping sleeve so that:
•
Nuts point downwards.
•
Cutting line is in middle of clamping sleeve.
•
There is sufficient spacing to adjoining components.
RA Replacing centre muffler (M57TU, M57T2)
BMW AG - TIS
14.02.2013 22:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -