X Series E83 X3 3.0d (M57TU) OFFRD
31 53 040
Removing and installing/replacing right
output shaft bearing block
Necessary preliminary tasks:
•
Remove right output shaft
N46:
Release screw (1) and remove heat shield from bearing block.
Tightening torque 31 60 3AZ
.
Release screws (2) and remove bearing block support with heat
shield.
Tightening torque 31 60 2AZ
.
Release grounding strap on bearing block.
Release screws and remove bearing block (1) from oil sump.
Installation:
Replace O-ring / remove protective caps.
Tightening torque 31 60 1AZ
.
RA Removing and installing/replacing right output shaft bearing block
BMW AG - TIS
15.02.2013 00:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
