X Series E83 X3 3.0d (M57TU) OFFRD
Place dial gauge sensor on rim shoulder.
Turn wheel by hand and measure max. radial runout.
Carry out measurement on both rim shoulder sides.
Note:
Dial gauge must be vertical to rim shoulder.
Position sensor on rim flange.
Turn wheel by hand and measure max. lateral runout.
Carry out measurement on both rim flanges.
Note:
Dial gauge must be vertical to rim flange.
Important!
Avoid transformation errors during subsequent installation
tasks.
RA Checking rim for face and radial runout
BMW AG - TIS
15.02.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -