X Series E83 X3 3.0d (M57TU) OFFRD
Release retaining elements (1 to 3) on wheel arch cover (4).
Lever out wheel arch cover (4) at side.
Installation:
Make sure wheel arch cover (4) is in correct position.
Release screw (1) on bumper trim (2).
Important!
Do not damage bumper trim when pulling off.
Lever out bumper trim (1) with special tool 00 9 317 in direction
of arrow.
Version without headlight cleaning system:
Pull bumper trim (1) forwards a little.
If necessary, disconnect plug connections on ultrasonic sensors
and/or front fog lamps.
Remove bumper trim (1) towards front with aid of a 2nd person.
Version with headlight washer system:
Note:
Have a rubber plug on hand.
Pull bumper trim (3) forwards a little.
Unlock hose (1), detach and seal pump outlet (2).
Remove bumper trim (3) towards front with aid of a 2nd person.
RA Removing and installing front bumper trim (from 09/2006)
BMW AG - TIS
15.02.2013 05:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
