X Series E83 X3 3.0d (M57TU) OFFRD
Detach hot water hoses (1) from heater and blow coolant out of
heater core.
Seal connections on heater with plugs.
Installation:
Do not mix up coolant hoses.
Recycling
Coolant emerges when coolant hoses are detached.
Have a suitable collecting container ready.
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Release screw (1) and remove refrigerant line from expansion
valve.
Installation:
Tightening torque 64 53 11AZ
.
Replace all sealing rings.
Release screws (1) on both sides.
Tightening torque 64 11 4AZ
.
-
Remove instrument panel trim
RA Removing and installing/replacing heater
BMW AG - TIS
15.02.2013 15:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -