X Series E83 X3 3.0d (M57TU) OFFRD
Disconnect plug connection (1).
Release screw (2) and lay cable to one side.
Release screws (1), disconnect refrigerant lines and remove
compressor (2).
Installation:
Tightening torque 64 52 1AZ
.
Replace all sealing rings and moisten with refrigerant oil.
Adapter sleeve (3) must not be damaged, replace if necessary.
Ensure correct seating.
After installation:
•
Evacuate and fill A/C system
•
If necessary, fill windscreen washer fluid reservoir
RA Replacing A/C system compressor (M57T2)
BMW AG - TIS
15.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
