X Series E83 X3 3.0d (M57TU) OFFRD
Release rear retaining screw (1).
Tightening torque 72 12 4AZ
.
Note:
Screw is held in end fitting by locking washer.
Release screws (1) on retaining clips (2).
Tightening torque 72 12 3AZ
.
Unlock and disconnect plug (1) for AHPS head airbag gas
generator (2).
Release screws (1) on gas generator (2).
Tightening torque 72 12 2AZ.
Remove complete AHPS head airbag with gas generator.
RA Removing and installing/replacing left or right AHPS2 head airbag (version witho
BMW AG - TIS
15.02.2013 17:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -