X Series E83 X3 3.0d (M57TU) OFFRD
Note:
If necessary, remove felt.
Installation:
Remove adhesive residue and clean adhesive area with
isopropanol.
Apply 5 mm dia. butylene tape (Terostat 2460) on left and right in
groove.
A
= 30 mm
±
2
B
= 15 mm +5/-0
C
= 40 mm
±
2
Installation:
Clean adhesive area on airbag cover (3) with isopropanol.
Remove backing paper from butyl.
Lug (2) of airbag cover (3) must snap into groove (1) in
instrument panel.
Release screws (1) and remove airbag cover (2).
Tightening torque 72 12 10AZ
.
RA Removing and installing/replacing airbag cover on passenger side
BMW AG - TIS
15.02.2013 17:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
