X Series E83 X3 3.0i (M54) OFFRD
51 24 004
Adjusting rear lid lock
Necessary preliminary tasks:
•
Remove trim on tail panel at top
Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear
lid.
For ideal adjustment, refer to Body gap dimensions.
Screw in buffer stops for rear lid on left/right completely.
Note:
Operation is described in:
•
Removing and installing/replacing buffer stops on rear lid.
Check fulcrum pads on lower section of rear lid lock for damage
and replace if necessary.
Check striker (1) on rear lid for damage, replace if necessary.
Unclip cover (2).
RA Adjusting rear lid lock
BMW AG - TIS
16.02.2013 22:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -