X Series E83 X3 3.0Sd (M57T2) OFFRD
12 14 550
Replacing control module (DME)
Follow instructions for removing and installing electronic control
units.
Before replacing the control module, always follow the instructions
listed below:
·
Code control unit.
·
Program control unit.
Caution!
It is absolutely essential to read out the fault memory with the
MoDiC or the BMW DIS and to create a fault memory printout.
Turn off ignition.
Release screws (1).
Remove cover.
RA Replacing control module (DME)
BMW AG - TIS
19.02.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
