X Series E83 X3 3.0Sd (M57T2) OFFRD
Release glow plugs (1) with special tool 11 6 050 .
Tightening torque 12 23 2AZ
.
Note:
If necessary, drill out special tool 11 6 050 with a 9.5 mm dia.
twist drill bit approx. 20 mm deep.
Installation:
Different glow elements in M47 and M47TU engines!
M47 glow elements (1) without designation groove.
M47TU rapid start glow elements (2) with designation groove and
silver surface.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing all glow plugs (M57 / M57TU / M47TU / M47T2 / M57T2)
BMW AG - TIS
19.02.2013 18:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -