X Series E83 X3 3.0Sd (M57T2) OFFRD
Important!
Risk of damage:
Carefully feed cable out of cable guides (3 and 4). Do not
kink cable.
Removing fuel level sensor:
•
Disengage cable from guides (3 and 4).
•
Carefully pull tab (1) in direction of arrow; at the same time,
press tab (2) in direction of arrow and press out fuel level
sensor downwards.
Installation:
Observe the following procedure when installing the fuel level
sensor.
1.
Carefully push fuel level sensor (1) in direction of arrow onto
sensor holder (2).
2.
Fuel level sensor must snap audibly into place!
3.
Carefully feed cable into cable guide (3).
Do not kink cable.
Make sure fuel level sensor is correctly positioned in both
guides (see arrows).
Illustration shows cutaway model:
Installation:
Lay cable (1) through upper loop of tank support (2).
RA Removing and installing or replacing fuel gauge sensor (diesel, right)
BMW AG - TIS
19.02.2013 19:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
