X Series E83 X3 3.0Sd (M57T2) OFFRD
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disk.
Flange automatic transmission to engine.
Installation:
Before installing transmission cross-member, turn special tool
11 0 250 back with adjusting screw (1) to measurement "A"
(installation position).
Installation position, measurement "A" = approx. 36 cm.
RA Removing and installing automatic transmission (6HP26Z)
BMW AG - TIS
19.02.2013 19:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -