X Series E83 X3 3.0Sd (M57T2) OFFRD
With a screwdriver, press constant-velocity joint (at the
disassembly grooves) off input flange.
Important!
Do not let propeller shaft fall into joints.
Joints and rubber sleeve on constant-velocity joint can be
damaged.
Brace propeller shaft at center mount (1) and release nuts.
Tightening torque 26 11 6AZ
.
Bend propeller shaft downwards on center bearing.
Remove propeller shaft from transmission output flange and
remove constant-velocity joint from final drive.
RA Removing and installing complete propeller shaft (constant-velocity joint)
BMW AG - TIS
19.02.2013 20:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
