X Series E83 X3 3.0Sd (M57T2) OFFRD
31 12 640
Replacing rubber mounts in both control
arms (control arms removed)
Special tools required:
•
31 1 051
•
31 1 054
•
33 3 054
Press out rubber mount with special tools 31 1 051 , 31 1 054
and 33 3 054 .
Installation:
Keep rubber mount and bore in control arm clean and free from
grease.
Press in rubber mount from chamfered side of control arm bore.
Installation:
Protrusion (A) = 5.75
±
0.7 mm.
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
RA Replacing rubber mounts in both control arms (control arms removed)
BMW AG - TIS
19.02.2013 20:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -