X Series E83 X3 3.0Sd (M57T2) OFFRD
31 60 535
Replacing both gaiters on left and right of
output shaft
Necessary preliminary tasks:
•
Remove and clean output shaft
Grip output shaft (1) in vice with aluminium clamping jaws.
Note:
2 = Joint, wheel side
3 = Joint, transmission side
Replacing gaiter of wheel-side joint:
Release band clamps (1, 2).
Pull back gaiter (3).
Press off joint (1) via contact pressure of retaining ring on
shaft (2).
Installation:
Push on joint until retaining ring can be heard to snap into place.
RA Replacing both gaiters on left and right of output shaft
BMW AG - TIS
19.02.2013 20:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -