X Series E83 X3 3.0Sd (M57T2) OFFRD
Open weld joints in area (1).
Mark severance cut (1) in accordance with measurement and cut.
Measurement a=190 mm
Note:
Right side only:
Measurement a=180 mm
Installation:
Weld in reinforcement plate at severance cut (1).
Preparation of new part:
Mark severance cut (1) in accordance with vehicle and cut.
Installation:
Adjust all new parts to fit with straightening attachment or
universal mount.
Weld new component in area (1).
Installation:
Adjust new part to fit with straightening attachment or universal
mount.
RA Replacing front left engine carrier (partial replacement between front axle take
BMW AG - TIS
20.02.2013 00:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -