X Series E83 X3 3.0Sd (M57T2) OFFRD
51 71 412
Removing and installing rear spoiler
Necessary preliminary tasks:
•
Remove trim for rear window frame at top.
Detach hose in area (1).
Disconnect plug connection (2).
Unclip lines at points (3).
Disconnect plug connection (4).
Press rubber grommet (5) upwards out of rear lid (6).
Installation:
Make sure rubber grommet (5) is correctly seated.
Lever out rubber plug (1).
Unscrew nuts (2).
Tightening torque 51 71 2AZ
.
Important!
Carefully remove rear spoiler (3) in upwards direction from
rear lid (4) (with aid of a 2nd person) and place on a clean
surface.
Note:
Lines may get caught as they are pulled out. If necessary, support
lines as the are being fed out.
Installation:
Sealing washers (1) and side buffer stops must not be damaged.
Make sure there is a uniform gap all round.
If necessary, carry out height adjustment of rear spoiler (3) using
adjusting screws (2).
RA Removing and installing rear spoiler
BMW AG - TIS
20.02.2013 03:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
