X Series E83 X3 3.0Sd (M57T2) OFFRD
61 31 020
Removing and installing/replacing ignition
starter switch
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove lower section of steering column trim
Remove sealing varnish and release headless setscrews (1).
Detach ignition starter switch (2) in direction of arrow.
Installation:
Secure headless setscrews (1) with sealing varnish.
Open lock (3) in direction of arrow and disconnect plug (4) from
ignition starter switch (2).
RA Removing and installing/replacing ignition starter switch
BMW AG - TIS
20.02.2013 05:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
