X Series E83 X3 3.0Sd (M57T2) OFFRD
61 35 795
Removing and installing (replacing) control
unit for adaptive headlight
Important!
Read and comply with notes on protection against
electrostatic discharge (ESD protection).
Necessary preliminary tasks:
•
Remove right glovebox with housing
Unlock catch (1) in direction of arrow.
Pull control unit for adaptive headlight (2) out of equipment
carrier (3) slightly.
Unlock plug connection (4) and disconnect.
Remove control unit for adaptive headlight (2).
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) control unit for adaptive headlight
BMW AG - TIS
20.02.2013 05:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -