bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (up To |Page 2329 > < 9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0|Page 2327
Page 1
background image

63 21 183

Removing and installing/replacing left or right
rear light (on rear lid) (up to 09/2006)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove panel for rear lid

Disconnect plug connection (1).

Slacken nut (2). Tightening torque  63 21 1AZ

.

Feed out rear light (3) in direction of arrow and remove in
outward direction from rear lid.

Remove socket housing.

 

Installation:

Make sure guide (4) is correctly seated in cutout for rear lid (5).

Make sure sealing frame for rear light is correctly seated on rear
light (3)

RA  Removing and installing/replacing left or right rear light (on rear lid) (up to 

BMW AG - TIS

20.02.2013  06:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (up To |Page 2329 > < 9 RA Removing And Installing_replacing Left Or Right Rear Light (on Rear Lid) (from 0|Page 2327