X Series E83 X3 3.0Sd (M57T2) OFFRD
72 12 000
Removing and installing / replacing airbag
module on passenger side
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Follow instructions for unlocking and locking airbag plug
connections.
Incorrect handling can activate airbag and cause injury.
Warning!
Each time the passenger airbag is triggered, it is necessary to
replace its airbag cover.
We cannot guarantee that the retaining straps of the airbag
cover will not be damaged when the airbag is triggered.
If a predamaged airbag cover is reused, correct operation of
the retaining straps can no longer be guaranteed.
Necessary preliminary tasks:
•
Disconnect battery negative lead from starter battery
•
Remove airbag cover
•
Open glovebox and fold back fuse carrier
Unlock plug connection (1) and disconnect.
RA Removing and installing / replacing airbag module on passenger side
BMW AG - TIS
20.02.2013 09:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -