Z Series E52 Z8 (S62) ROADST
Tighten down cylinder head bolts in sequence 1 to 10.
Tightening torque, refer to 11 12 8AZ .
Note:
Coat all sliding surfaces on VANOS gear with engine oil as
antiseize agent.
Cylinder bank 1 to 4 (inlet side):
Keep timing chain tensioned and feed on inlet chain wheel (3).
Note:
The position of the bores in the inlet chain wheel (3) can be freely
selected; they do not have to line up with the threads yet.
Position inlet chain wheel (3) on centering sleeve. Do not insert
"any" screws into inlet chain wheel (3) yet.
Caution!
Timing chain must not skip.
Press tensioning rail against chain and keep tensioned.
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
06.02.2013 22:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
