Z Series E52 Z8 (S62) ROADST
Cylinder bank 1 to 4:
Pull off VANOS adjustment unit.
Remove special tool 11 2 300 .
Caution!
No piston must be in the TDC position when the cylinder head
is removed.
When the VANOS adjustment unit is removed, the chain wheels
of the inlet and exhaust camshafts are not non-positively
connected to the camshafts. Camshafts on cylinder bank 1 to 4
do not rotate.
Crank engine at central bolt against direction of rotation to 45
°
before TDC position.
Remove chain tensioning piston.
Remove right timing case cover (cylinder bank 1 to 4)
.
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
06.02.2013 22:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -