Z Series E52 Z8 (S62) ROADST
Adjusting pretension and end stop, front:
Adjusting pretension:
Lever out end cap (1), slacken screw underneath.
Adjust pretension by moving window guide rail and tighten down
screw.
Adjusting end stop:
Open complete door window glass.
Lever out end cap (2) and adjust end stop with screw underneath.
Caution!
Check emergency operation.
Adjusting pretension and end stop, rear:
Adjusting pretension:
Lever out end cap (1), slacken screw underneath.
Adjust pretension by moving window guide rail and tighten down
screw.
Adjusting end stop:
Open complete door window glass.
Lever out end cap (2) and adjust end stop with screw underneath.
Caution!
Check emergency operation.
RA Adjusting left or right front door window
BMW AG - TIS
07.02.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
