Z Series E52 Z8 (S62) ROADST
Installation:
In event of replacement or partial detachment, lay butylene tape
(sourcing reference: BMW Parts Service) on inner door plate or
sound insulation.
Seal cable penetrations with butylene tape.
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation (2).
Caution!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
RA Removing and installing/replacing acoustic insulation on left or right front doo
BMW AG - TIS
07.02.2013 03:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
