Z Series E85 Z4 2.5i (M54) ROADST
12 42 540
Replacing safety battery terminal (SBK)
Important!
Comply with safety regulations.
Investigate cause of safety battery terminal being triggered.
To do so, read fault memory of airbag control unit. Note fault
messages stored in memory. Rectify faults. Now clear the
fault memory.
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel.
•
Follow instructions for disconnecting and connecting battery.
•
Disconnect battery negative lead and cover.
•
Loosen electrical system cable.
•
Remove battery.
Note:
The safety battery terminal is replaced together with a complete
cable up to the battery positive terminal in the engine
compartment.
Unlock cover on terminal and remove.
Unlock both plug connections (1) and disconnect.
Release nut on electrical system cable (2).
RA Replacing safety battery terminal (SBK)
BMW AG - TIS
10.02.2013 19:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -