Z Series E85 Z4 2.5i (M54) ROADST
13 54 030
Removing and installing/sealing throttle
assembly (M54)
Necessary preliminary tasks:
•
Switch off ignition
•
Disconnect battery negative lead from battery and lay to one
side
Follow instructions for disconnecting and connecting battery.
•
If fitted (E85): remove sound generator
•
Remove air intake hose
Release screws (1) of cable duct mounting.
Place cable channel to one side.
Unlock plug (1) and detach from throttle assembly (3).
Release screws (2) and remove throttle assembly (3).
Installation:
Replace sealing ring (1) on throttle assembly (2).
RA Removing and installing/sealing throttle assembly (M54)
BMW AG - TIS
10.02.2013 19:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
