bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Lower Section Of Steering Spindle > < 1 RA Removing And Installing_replacing Upper Section Of Steering Column Trim|Page 1083
Page 1
background image

32 31 020

Removing and installing / replacing lower
section of steering column trim 

Necessary preliminary tasks:

Move steering column into "upper" and "extended" position

Remove steering wheel

Release screw.

Open adjusting lever.

Detach panel in rear area downwards and unclip.

Move plastic wedge from front between upper and lower sections.
Press lock (1) on left and right out of hook (2). Pull off lower
section of steering column cover towards bottom.

Important!

Do not scratch steering column cover.

Do not damage locks.

Installation:

Locks (1) must snap into place in hooks (2) on left and right.

RA  Removing and installing / replacing lower section of steering column trim

BMW AG - TIS

10.02.2013  21:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing _ Replacing Lower Section Of Steering Spindle > < 1 RA Removing And Installing_replacing Upper Section Of Steering Column Trim|Page 1083