Z Series E85 Z4 2.5i (M54) ROADST
34 33 071
Replacing vacuum hose for brake booster
(M54)
Note:
Read and comply with General Information.
Before beginning work, fully press the brake pedal several times to
reduce the vacuum pressure in the brake booster. This makes it
easier to detach the vacuum hose.
The non-return valve and the moulded hose are permanently
connected to each other are replaced together as a single unit.
Pull non-return valve (1) out of brake booster.
Open hose clip (2).
Pull off vacuum hose (3).
Installation:
Check seal for non-return valve and replace if necessary.
Replace hose clamp (2).
RA Replacing vacuum hose for brake booster (M54)
BMW AG - TIS
10.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -