Z Series E85 Z4 2.5i (M54) ROADST
61 31 057
Removing and installing/replacing switch unit
in center console
Open cover (1).
Remove ashtray insert (2) in direction of arrow from center
console function carrier (3).
Unscrew bolt (1).
Unclip side guides (2) and raise center console function
carrier (3).
Feed center console function carrier (3) out of front guides (5)
and pull back a little.
Unlock associated plug connections, disconnect and remove
center console function carrier (3) from center console (4).
Installation:
Make sure front guides (1) of center console function carrier (3)
are correctly seated.
Make sure side guides (2) of center console function carrier (3)
snap into place correctly.
Replacement:
Unlock plug (1) and unclip in direction of arrow from center
console switch unit (4).
Release screws (3) and remove switch unit on center
console (4) in direction of arrow from center console function
carrier (2).
RA Removing and installing/replacing switch unit in center console
BMW AG - TIS
11.02.2013 04:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -