Z Series E85 Z4 2.5i (N52) ROADST
Release nuts (1) and remove connecting plate (2).
Tightening torque 18 20 1AZ
.
Unscrew nut (3).
Tightening torque 18 20 1AZ
.
Remove primary muffler.
Installation:
Replace self-locking nuts.
Coat thread with copper paste, refer to BMW Parts Service.
Installation:
Replace both seals (1).
Installation:
Connect new front muffler and rear muffler by means of clamping
sleeves.
Cutting point is in middle of clamping sleeve.
Align exhaust system and clamping sleeves so that there is
sufficient distance to the adjoining components.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing front muffler (N52)
BMW AG - TIS
12.02.2013 04:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
