Z Series E85 Z4 2.5i (N52) ROADST
If necessary, remove heat shield.
Release bolts and remove bracke from engine carrier.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Replace screws.
Tightening torque 31 12 7AZ
.
Punch-mark centre of control arm.
Note:
Illustrated parts belong to special tool 00 7 500 .
If necessary, remachine special tool 31 2 151 (see drawing).
RA Replacing both control arm brackets
BMW AG - TIS
12.02.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
