Z Series E85 Z4 2.5i (N52) ROADST
51 21 225
Removing and installing or replacing inside
door opener in left or right front door
Special tools required:
•
00 9 317
Important!
Risk of damage!
Do not detach trim (1) with tool at edge (A).
Shape butyl into a ball and stick centrally on trim (1).
Pull out butyl ball together with trim in direction of arrow.
Release screw underneath.
Tightening torque 51 21 6AZ
.
Press carefully with special tool 00 9 317 against door
opener (1) and lever out.
Carefully feed door opener (1) forwards and downwards out of
door trim panel.
Important!
If door opener (1) is pulled out too vigorously, there is a risk
of damage to the door opener and the Bowden cable.
Unlock holder (1) for Bowden cable and remove door
opener (2).
RA Removing and installing or replacing inside door opener in left or right front d
BMW AG - TIS
12.02.2013 10:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
