Z Series E85 Z4 2.5i (N52) ROADST
Install actuating unit.
Press screws (1) and (2) out of hexagon head inwards and
secure.
Tightening torque, 52 12 8AZ
.
Adjust longitudinal seat setting:
Compress release tabs (1) and (2) on seat rail on left/right with
gripper (3) without play.
Push new adjusting device (1) onto threaded rod (3).
Secure expansion rivet (2).
Press actuating handle (1) downwards and lock clips (3) on
adjusting device (4).
If necessary, release expansion rivet (5) and readjust setting by
turning adjusting device (4).
Install front seat.
Move front seat into basic position.
Carry out function and adjustment check.
RA Removing and installing/replacing actuating unit on left or right front seat
BMW AG - TIS
12.02.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -