Z Series E85 Z4 2.5i (N52) ROADST
Withdraw drive shaft (1) from gearing (2).
Loosen screws (1).
Remove gearing (2).
Adjust front seat via drive shaft (1).
Note:
Detach cover (2) if gearing (4) is faulty.
Release screws (3) and remove gearing (4).
Remove front seat.
Replace seat mechanism on front seat.
RA Additional work in event of faulty drive/gearing for longitudinal seat adjustmen
BMW AG - TIS
12.02.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -