Z Series E85 Z4 2.5i (N52) ROADST
54 31 000
Adjusting convertible top
Remove main bearing cover trim.
Measure gap between inside edge of side panel and main
bearing.
Ideal dimension 52
±
1 mm.
Adjustment work only:
Remove convertible top
Release screws (1) and remove shim (2) or place underneath
Shims are 1 mm thick.
Note:
Check ideal adjustment of door window glass after completing
adjustment work on convertible top.
Initialize power windows.
RA Adjusting convertible top
BMW AG - TIS
12.02.2013 11:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
