Z Series E85 Z4 3.0i (M54) ROADST
Important!
Avoid a change of engine position in the transverse or
longitudinal direction.
Always make sure there is sufficient clearance between the
engine (or its attachment parts) and the body.
Important!
Risk of damage!
With the aid of an assistant and the supports (1), place cross
member 00 0 200 on the screw connections of the side
panels.
Secure special tool 11 0 020 with the off-centre hole to spindle
00 0 202 .
Fit suitable chains to special tool 11 0 020 and attach to both
engine lifting eyes.
Warning!
Danger of injury!
Tighten down all adjusting screws and nuts on cross member
00 0 200 .
Unscrew nuts (1).
Raise engine approx. 10 mm with cross member.
Installation:
Replace self-locking nuts.
Tightening torque 22 11 2AZ
.
RA Securing engine in installation position (M54)
BMW AG - TIS
15.02.2013 10:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -