Z Series E85 Z4 3.0i (M54) ROADST
Installation:
1.
Replace seal.
2.
Install oil sump.
3.
Insert all screws on transmission end,
4.
without preload at this stage.
5.
Tighten down screws on engine end.
6.
Tighten screws on transmission end.
RA Removing and installing, sealing or replacing oil sump (M54)
BMW AG - TIS
15.02.2013 10:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -