Z Series E85 Z4 3.0i (M54) ROADST
16 12 000
Removing and installing/replacing the sensor
for the fuel level gauge (right)
Note:
In the E85 only the right sensor for fuel level indication can be
replaced. If the left sensor is faulty, the fuel tank must be
replaced.
Sensors for fuel level indication, electric fuel pump and right
suction jet pump together form a single unit and can only be
replaced as such.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank.
•
Remove fuel filter.
Remove electric fuel pump.
RA Removing and installing/replacing the sensor for the fuel level gauge (right)
BMW AG - TIS
15.02.2013 13:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -