Z Series E85 Z4 3.0i (M54) ROADST
22 11 011
Replacing left engine mount (M54)
Necessary preliminary tasks:
•
Secure engine in installation position.
•
Release engine mounts on left and right from above.
Tightening torque, 22 11 1AZ.
•
Remove reinforcement plate.
•
Remove underbody protection.
Unfasten nut.
Tightening torque, 22 11 1AZ.
Partially release screws from engine support arm to engine block
until engine support arm can be tilted upwards.
Tightening torque, 22 11 3AZ.
Remove engine mount.
Installation:
Installation position of engine mount predetermined by locating pin
(3). Pin (3) is in direction of travel at front.
Heat shield is only present on right engine mount!
RA Replacing left engine mount (M54)
BMW AG - TIS
15.02.2013 13:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -