Z Series E85 Z4 3.0i (M54) ROADST
Slide torque converter up to first detent on transmission input
shaft.
Turn torque converter under slight pressure until opening in
converter hub snaps into driver of pump impeller and torque
converter slips noticeably inwards.
Approx. installation depth of torque converter = 31 mm, check with
special tool 00 2 550.
RA Removing and installing or replacing torque converter (A5S 325Z)
BMW AG - TIS
15.02.2013 14:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
