Z Series E85 Z4 3.0i (M54) ROADST
31 12 000
Removing and installing left or right control
arm
Special tools required:
•
32 3 090
Necessary preliminary tasks:
•
Remove front wheel
•
Remove reinforcement plate
•
If necessary, remove retaining angle for jointed rod of ride-
height sensor from control arm
Unfasten nut.
Press control arm off steering knuckle with special tool 32 3 090 .
Installation:
Keep journal on ball head or contact surface and bushing in
steering knuckle clean and free from oil and grease.
Replace self-locking nut.
Important!
Do not use an impact screwdriver to tighten the screw
connection!
Tightening torque 31 12 6AZ
.
RA Removing and installing left or right control arm
BMW AG - TIS
15.02.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
