Z Series E85 Z4 3.0i (M54) ROADST
51 12 156
Removing and installing rear bumper trim
Version with PDC:
E86:
•
Remove panel in luggage compartment at top right
Remove right trim for rear light (1) in luggage compartment.
Pull out luggage compartment wheel arch trim (2) in inwards
direction slightly.
Disconnect plug-in contact (1).
Feed back cable and press through with grommet (2) outwards.
Version with TV function:
E86:
•
Remove panel in luggage compartment at top left
Turn turn-lock fastener (1) in direction of arrow and remove left
trim (2).
Pull out luggage compartment wheel arch trim (1) in inwards
direction slightly.
Disconnect plug-in contacts (2).
Feed back cable and press through with grommet outwards.
RA Removing and installing rear bumper trim
BMW AG - TIS
16.02.2013 00:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
