Z Series E86 M coupe (S54) COUPE
67 31 501
Removing and installing/replacing drive unit
for longitudinal seat adjustment
Note:
Front seat is removed.
Unlock plug housing (1) and unclip in direction of arrow.
Unfasten plug connection (2) and disconnect.
Note:
Secure drive for longitudinal seat adjustment (4) against falling
out.
Release screws (3) and remove drive for longitudinal seat
adjustment (4) in direction of arrow from flange (5).
If necessary, remove inner drive shaft from drive for longitudinal
seat adjustment (4).
Installation:
Make sure drive shaft (1) is correctly seated.
Make sure drive for longitudinal seat adjustment (2) is correctly
seated on flange (3).
RA Removing and installing/replacing drive unit for longitudinal seat adjustment
BMW AG - TIS
07.02.2013 17:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -