Z Series E86 Z4 3.0Si (N52) COUPE
Assemble cross member 00 0 200 with special tools 00 0 202 ,
00 0 204 , 00 0 208 .
Modification:
Replace profile strips with special tools 00 0 451 .
Note:
Use towing hook (72 15 8 108 670).
Important!
Avoid a change of engine position in the transverse or
longitudinal direction.
Always make sure there is sufficient clearance between the
engine (or its attachment parts) and the body.
Important!
Risk of damage!
Position transverse member 00 0 200 with a 2nd person
helping by way of rests (1) on bolt connections of side
panels.
Screw in towing hook (2) and tighten down to approx. 30 Nm.
Secure special tool 11 0 020 to spindle 00 0 202 .
Fit suitable chains to special tool 11 0 020 and attach to towing
hook (2) or engine lifting eye.
RA Securing engine in installation position (N52)
BMW AG - TIS
08.02.2013 07:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -