Z Series E86 Z4 3.0Si (N52) COUPE
11 23 010
Removing and installing or replacing
vibration damper (N52)
Necessary preliminary tasks:
•
Detach front underbody protection.
•
Remove drive belt.
Release screws (1).
Tightening torque: 11 23 1AZ
.
Remove vibration damper (2).
Assemble engine.
RA Removing and installing or replacing vibration damper (N52)
BMW AG - TIS
08.02.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -