Z Series E86 Z4 3.0Si (N52) COUPE
Illustrations show E46.
Pull lock (1) upwards and detach heat exchanger towards rear.
Installation:
Press lock (1) downwards before pushing on heat exchanger.
The lock must snap audibly into place when the heat exchanger is
forced on.
Check sealing rings (1), replace if necessary.
Add final details to vehicle.
RA Removing and installing/replacing heat exchanger for automatic transmission
BMW AG - TIS
08.02.2013 08:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -