Z Series E86 Z4 3.0Si (N52) COUPE
25 11 245
Replacing shift arm support bearing
Necessary preliminary tasks:
•
Remove rear reinforcement plate
•
Remove exhaust system from exhaust manifold and support
•
Remove middle heat shield
Lever support bearing (1) with a short screwdriver out of
mounting.
Pull support off shift arm.
Installation:
Grease bearing journal of shift arm.
Fit support bearing (1) with opening (2) towards top rear
onto mounting.
RA Replacing shift arm support bearing
BMW AG - TIS
08.02.2013 09:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
